RoHC Profile Common Options Configuration Mode Commands

 

 

The RoHC Profile Common Options Configuration Mode is used to set timers that, upon expiration, release header compression contexts.

 

 

delay-release-hc-context-timer

Sets a delay in releasing RoHC contexts allowing for context continuation during intra-gateway handoffs.

Product

HSGW, PDSN

Privilege

Administrator

Syntax

delay-release-hc-context-timer seconds

no delay-release-hc-context-timer

no

Removes previously configured value for this command. No value disables the feature.

seconds

Specifies the number of seconds the system delays before releasing the header compression context. seconds must be an integer value from 0 to 65535.

Usage

Use this command to set a delay in releasing a header compression context. THis command is necessary when employing RoHC and mobility. Typically, when an RP connection is released, the header compression context is also released immediately. However, in mobility situations, such as intra-PDSN handoffs, the header compression context should be preserved. Adding a delay to cover the handoff time allows the context to be maintained.

A header compression context contains the compression/decompression configuration and statistics for the session.

Example

The following command sets the header compression release delay to 20 seconds:

delay-release-hc-context-timer 20

 

end

Exits the current mode and returns to the Exec Mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

end

Usage

Change the mode back to the Exec mode.

 

exit

Exits the current mode and returns to the previous mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

exit

Usage

Return to the previous mode.

 

inactive-traffic-release-hc-context-timer

Set an inactivity timer that is checked when inactivity is detected on an SO67 A10 bearer connection with negotiated RoHC parameters. If the inactivity continues to the end of the configured time, the header compression context is released.

Product

HSGW, PDSN

Privilege

Administrator

Syntax

inactive-traffic-release-hc-context-timer seconds

no inactive-traffic-release-hc-context-timer

no

Removes previously configured value for this command. No value disables the feature.

seconds

Specifies the time, in seconds, the system waits for activity on the bearer channel before releasing the header compression context. seconds must be an integer value from 1 to 65535.

Usage

Use this command to set a timer that is started upon detecting inactivity on the bearer channel. Upon expiry, the header compression context is released. Enable this feature to allow for efficient memory utilization.

Example

The following command sets the bearer channel inactivity timer to 60 seconds:

inactive-traffic-release-hc-context-timer 60

 

 

Cisco Systems Inc.

Tel: 408-526-4000

Fax: 408-527-0883